Elevate Playtime with SmartKidsHub's Delightful Collection of Educational and Entertaining Treasures!

Alamosaurus (Samuel) (Prehistoric Animal Models by PNSO) – Dinosaur Toy Blog

Jurassic North America was home to an astonishingly diverse assemblage of sauropod dinosaurs, roughly 20 species have been recovered from the Morrison Formation, including iconic genera such as Brontosaurus, Diplodocus, Apatosaurus, Camarasaurus, and Brachiosaurus. Then, by the time the late Cretaceous started, sauropods were all gone. In what is known as the “sauropod hiatus” western North America appears to have experienced a 30-million-year period where sauropods no longer occupied Laramidia. Where they went is a mystery but then, during the tail end of the Cretaceous, Alamosaurus shows up.

Alamosaurus probably immigrated from South America but no matter, the appearance of Alamosaurus ends the sauropod hiatus and even though it is only a single genus of sauropod, what a sauropod it is! Alamosaurus has many accolades to its name. It was the largest dinosaur to ever roam North America, the only sauropod to live in North America at the end of the Cretaceous, the only titanosaur to ever live in North America, and one of the last surviving non-avian dinosaurs. Alamosaurus would have rubbed shoulders with the likes of Quetzalcoatlus, Torosaurus, and Tyrannosaurus, which means a potential battel between Tyrannosaurus and a sauropod is not purely the stuff of fiction. Speaking of which, Alamosaurus is actually featured in Jurassic Park. The sauropod skeleton facing off with Tyrannosaurus in the visitor center rotunda is an Alamosaurus.

All of that should make Alamosaurus a more popular animal than it is but it remains relatively obscure. That seems to be changing though, as people start to recognize what an important and impressive animal it is. It recently had an appearance in Prehistoric Planet and is showing up in video games as well. Most significant to us collectors though are the release of two back-to-back Alamosaurus models from PNSO and Haolonggood. The first decent models of the genus ever! And yes, CollectA did make an Alamosaurus many years ago, but it hardly did the genus justice.

The scale of PNSO’s Alamosaurus is what we’ll address first since it has been an issue of contention within the community. The figure stands about 11.5” (29 cm) tall and measures about 16” (40 cm) long. That’s not the total length of the model itself though, and when measured down the midline of the back the figure comes out to be about 21.5” (54.61 cm). Using that, the figure fits the 1:35 scale when scaled down from an animal measuring 64’ (19.5 meters). But…most maximum size estimates for Alamosaurus put it at about 98’ (29.8 meters). Using that length, the figure comes out to be closer to 1/55 in scale.

The size of the box makes you think you’re getting a much larger figure than you actually are.

This revelation obviously disappoints a lot of collectors, and I don’t blame them. When displaying one of the largest animals to ever live you want it to be scaled down from its maximum length. If you strictly collect 1/35 it will look smaller in your collection than you might like. But there is an argument to be made for a smaller size too. Most animals do not reach their maximum size potential and average out much smaller. A 65’ sauropod is still a massive animal and likely within the average size range for Alamosaurus. Also, it just saves space. I don’t have a lot of these large sauropod models simply because they take up a lot of space in my display cabinet. So, for me this is a good size, and if you want a larger Alamosaurus then look into Haolonggood’s.

Size aside, the PNSO Alamosaurus still has presence. It is presented striding forward with the left forelimb slightly lifted. The tail organically snakes out behind the figure, veering upwards towards the left and then back down with the tip bending rightward. The head is looking slightly rightward. What makes this model particularly impressive is the thickness of the neck, which at its base is nearly as thick as the robust torso. I like sauropods with thick necks and that gives Samuel a slight edge over Haolonggood’s Alamosaurus, at least in this instance.

Despite having material from multiple specimens of various sizes we still don’t have an Alamosaurus skull, just their peg-shaped teeth. The heads of titanosaurs are rare in general. PNSO gave this figure a skull similar in shape to that of Nemegtosaurus, a titanosaur for which the skull is known. The muzzle is narrow with the mouth lacking cheeks, and with a beak on the tip, a feature known from Camarasaurus but seldom applied to other sauropods. The teeth are exposed and while I’m not a fan of exposed teeth the head is so small that it’s not an issue, the teeth are barely visible. The nostrils are correctly placed towards the tip of the snout instead of further back.  

The scale detail is so fine that it is barely visible, but that’s a good thing on a sauropod figure of this scale. Where they are visible the scales are small and pebbly while square shaped scales are present on the belly. A row of small scales also runs down the midline of the back. Small keeled osteoderms are scattered around the base of the neck, torso, and tail with larger pointed osteoderms running down the back and transitioning to a single row on the tail.

Osteoderms are known from a number of titanosaurs, including Alamosaurus, but too few of them are known to confidently recreate their size, number, or distribution here. I don’t really mind a bit of speculation though, and the osteoderms add a lot of appeal here. Slightly raised skin and clusters of scales around the osteoderms give them a natural appearance. And of course, there are plenty of skin folds and wrinkles for added detail and texture. The wrinkling is present mostly around the lower torso and limb joints but is most obvious and appreciated along the neck.

PNSO has chosen to give Samuel thumb spikes on the manus, however titanosaurs by-and-large have completely lost their phalanges. There are exceptions to this however, and the titanosaur Diamantinasaurus still possessed phalanges and thumb claws. In this instance their addition can be considered speculative, but I wouldn’t call it inaccurate. The manus is still correctly horseshoe-shaped with the rest of the manus encased in flesh. The hindfeet possess three clawed digits.

Samuel has a tan colored neck with a dark wash over it that brings out the abundant wrinkling and fine scale detail. The head is gray with a tan colored jaw. The tan coloration continues up around the orbit and is highlighted in pink. The beak is brown, teeth white, and eyes orange with black pupils. Gray bands run down the neck and the gray coloration becomes dominant on the torso where only the belly and inside surface of the limbs are tan. There’s a bit of a brown transition between the gray and tan portions on the torso. The tail resumes the tan with gray band configuration we see on the neck.

Smaller osteoderms are the same color as the skin but the larger osteoderms are tipped in brown. Paint application on the larger osteoderms isn’t great and many of them are not completely painted. The toenails are brown, and the cloaca has a faint brown wash around it but it’s not dirty looking like some of CollectA’s figures.  Overall, I find this to be an attractive paintjob that finds a balance between looking natural but interesting too.

With the Papo Brachiosaurus.
With the Eofauna Diplodocus.
If you want it to look truly gigantic, just display it with smaller figures. These are the Safari Sue and Torosaurus toys.

PNSO’s Alamosaurus didn’t have a long time in the limelight and was quickly forgotten once Haolonggood’s Alamosaurus was released. Most collectors seem to have gravitated towards Haolonggood’s, which admittedly has greater appeal in terms of size, fine detail, and with their choices of paintjobs. But each figure has its pros and cons and there is much to be admired about PNSO’s Alamosaurus. Its smaller size has an appeal of its own to those with space constraints and some aspects of its anatomy might be more appealing too, like the thickness of the neck. It’s nice to have options and there’s no denying that we’re spoiled for choice. Hopefully someone will review the Haolonggood Alamosaurus so it has a presence on the blog as well. The PNSO Alamosaurus is currently in production and retails for $74.99. That makes it about $100 cheaper than Haolonggood’s, so that’s something else to factor in.

With the Safari Camarasaurus.
With the CollectA Jobaria.
With the CollectA Alamosaurus.

Support the Dinosaur Toy Blog by making dino-purchases through these links to Ebay and Amazon. Disclaimer: links to Ebay.com and Amazon.com on the The Dinosaur Toy Blog are often affiliate links, when you make purchases through these links we may make a commission

Trending Products

0
Add to compare
iHaHa Toddler Boy Toys for 3 4 5 6 Year Old, Total 236 PCS Construction Toys Race Tracks for Boys Kids Toys, Birthday Toys for 3 4 5 6 Year Old Boys Girls Kids
0
Add to compare
$34.99
0
Add to compare
Crayola Ultimate Light Board – White, Kids Tracing & Drawing Board, Holiday & Birthday Gift for Boys & Girls, Toys, Ages 6, 7, 8
0
Add to compare
$19.94
0
Add to compare
CPSYUB Matching Eggs Toys Color & Shape Recognition Sorter Puzzle, Montessori Toys for Baby Easter Travel Bingo Game, Sensory Early Learning Fine Motor Skills for Year Old Kids
0
Add to compare
$17.99
0
Add to compare
Laradola Dinosaur Toys for 3 4 5 6 7 8 Year Old Boys, Kids Take Apart STEM Construction Building Kids Toys with Electric Drill, Party Christmas Birthday Gifts Boys Girls
0
Add to compare
$20.59
.

We will be happy to hear your thoughts

Leave a reply

SmartKidsHub
Logo
Register New Account
Compare items
  • Total (0)
Compare
0
Shopping cart